Model: LC8606 Package Specification: 150 mm×4.3 mm×10 m 220mm×4.3mm×10m 220 mm×4.3 mm×10 m 300mm×4.3mm×10m Storage life: 12 months It contains EP reinforcing layer and semi-vulcanized layer. It has good abrasion resistance, high tensile strength and antistatic resistance, suitable for repair of longitudinal scratch, partial penetration, edge damage and tearing of conveying belt. Instructions for use: 1. Remove the damaged and non-sticking parts of the conveying belt at the place where the conveying belt is to be repaired, and roughen it to remove dust, water vapor and oil stain with utility knife. 2. Remove the surface protective film of the strong repair strip of conveying belt, and cut the size according to the requirements. 3. Stir the LC8088/LC8099 adhesive evenly and then brush twice on the strong repair strip and the repaired part. The adhesive shall be completely dried for the first time and then dried for the second time until the adhesive will not be wiped off. 4. Use LC8610 pinch roller to roll repeatedly, and completely discharge the bubbles generated by the adhesive reaction in the strong repair strip of conveying belt. 5. The startup time can refer to the performance of the adhesive.
Audited Supplier 
){kind=link}